Controleo3 Replacement LCD Screen

Repair Process

1. Cut the flex cable with scissors. Cut close to the screen to make removal easier.

2. Carefully desolder and remove the remaining flex cable, taking care not to damage pads. This is best done with a hot air gun.

3. Clean the pads of all solder and flux. We use a soldering iron to remove the solder and isopropyl alcohol to clean the flux.

4. Tin the pads with solder. The tinning should form a visible bump across the entire length of the pad.

5. Align the new screen with the pads and secure it in place using the flex cable’s glue strip. There are holes in the corners of the cable and the board to help you align it properly.

6. Apply the soldering iron to the first and last pads, holding down the flex cable with tweezers, a toothpick, or a small screwdriver. Don't add solder!

7. Solder the remaining pads using the same method.

8. Test the screen.

Screen Size: 3.95” (10cm)

Resolution: 320 x 480px

Touchscreen: Resistive

Dimensions: 2-3/8” x 3-5/8” (6cm x 9.5cm)

Weight: 1.4oz

Shipping rates posted above are estimates. International rates vary depending on destination. Final shipping rates are calculated at checkout.

International customers are responsible for paying any additional duties and taxes. These charges are determined by the customs authorities of the destination country and are beyond our control.

*See our Shipping Policy for more information.